Adjustable Ahead AL stem 0–60° / 31.8 mm
€34.90
Subscription
Ahead stem 1 1/8", adjustable from 0° to 60°. A toothed lock washer facilitates the angle adjustment, providing a positive, zero-play and rigid connection. The stem can be easily and quickly adjusted by loosening just one bolt. Clamp diameter: 31.8 mm Length: 90, 110 mm Angle: 0° – 60° Colour: black
Adjustable Ahead stem 25.4 mm
€37.90
Subscription
Ahead stem 1 1/8", adjustable from -20° to +40°. A toothed lock washer facilitates the angular positioning thus enabling a tight, rigid connection. Quick and easy adjustment by loosening a single bolt. 3D cold-forged 6061/T6 aluminium Highly resistant laser engraved logo Sandblasted and matt-black anodised or polished and silver anodised 4-bolt handlebar clamp
Adjustable Ahead stem 31.8 mm
€38.90
Subscription
Ahead stem 1 1/8", adjustable from -20° to +40°. A toothed lock washer facilitates the angular positioning thus enabling a tight, rigid connection. Quick and easy adjustment by loosening a single bolt. 3D cold-forged 6061/T6 aluminium Highly resistant laser engraved logo Sandblasted and matt-black anodised or polished and silver anodised 4-bolt handlebar clamp
Adjustable Deluxe AICR stem
€79.90
Subscription
Adjustable stem for internal cable routing. Compatible accessories: Headset cover: Item number 17029100 Light adapter: Item number 17007041
Adjustable Pro stem -10° to 60° / 31.8 mm
€37.90
Subscription
Ahead stem 1 1/8", adjustable from -10° to 60°. A toothed lock washer facilitates the angle adjustment, providing a positive, zero-play and rigid connection. The stem can be easily and quickly adjusted by loosening just one bolt Clamp diameter: 31.8 mm Length: 80, 100, 110 mm Angle: -10° – 60° Material: 6061-T6 aluminium Colour: black
Adjustable threaded stem 1 1/8 inch 25.4 mm
€39.90
Subscription
Threaded stem; adjustable from -20° to +40° with shaft diameter 25.4 mm (for 1 1/8 inch). A toothed lock washer facilitates the angular positioning thus enabling a tight, rigid connection. Quick and easy adjustment by loosening a single bolt. 3D cold-forged 6061/T6 aluminium Highly resistant laser engraved logo Finish: sandblasted and anodised or polished 4-bolt handlebar clamp
Ahead SL stem 17° / 25.4 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available
Ahead SL stem 17° / 26 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available
Ahead SL stem 17° / 31.8 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available Suitable for E-Bikes in Category B: E-Mountain Bike (Light Off-Road to E-Enduro) PROCRAFT E-MTB components are intended for off-road use. In addition to use on paths and technical sections that have roots, smaller stones, ruts and loose ground, components of this category may be used in rough terrain with rocky sections. Jumps up to 1.0m in height are permitted. PROCRAFT components in this category are not intended for extreme riding such as dirt jumping, freeriding, downhill, stunts or North Shore trails of any type – neither in training nor competition. Generally, these are MTB hardtails and full-suspension e-MTBs with travel up to approximately 170 mm. The maximum permissible payload (rider plus gear) for PROCRAFT components in this category is 120kg. However, the maximum permissible payload of the bicycle to which these PROCRAFT components are fitted must be observed. More information on intended use of the Procraft e-bike components.
Ahead SL stem 25° / 31.8 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available Suitable for E-Bikes in Category B: E-Mountain Bike (Light Off-Road to E-Enduro) PROCRAFT E-MTB components are intended for off-road use. In addition to use on paths and technical sections that have roots, smaller stones, ruts and loose ground, components of this category may be used in rough terrain with rocky sections. Jumps up to 1.0m in height are permitted. PROCRAFT components in this category are not intended for extreme riding such as dirt jumping, freeriding, downhill, stunts or North Shore trails of any type – neither in training nor competition. Generally, these are MTB hardtails and full-suspension e-MTBs with travel up to approximately 170 mm. The maximum permissible payload (rider plus gear) for PROCRAFT components in this category is 120kg. However, the maximum permissible payload of the bicycle to which these PROCRAFT components are fitted must be observed. More information on intended use of the Procraft e-bike components.
Ahead SL stem 35° / 31.8 mm
€34.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available Suitable for E-Bikes in Category B: E-Mountain Bike (Light Off-Road to E-Enduro) PROCRAFT E-MTB components are intended for off-road use. In addition to use on paths and technical sections that have roots, smaller stones, ruts and loose ground, components of this category may be used in rough terrain with rocky sections. Jumps up to 1.0m in height are permitted. PROCRAFT components in this category are not intended for extreme riding such as dirt jumping, freeriding, downhill, stunts or North Shore trails of any type – neither in training nor competition. Generally, these are MTB hardtails and full-suspension e-MTBs with travel up to approximately 170 mm. The maximum permissible payload (rider plus gear) for PROCRAFT components in this category is 120kg. However, the maximum permissible payload of the bicycle to which these PROCRAFT components are fitted must be observed. More information on intended use of the Procraft e-bike components.
Ahead SL stem 40° / 25.4 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available
Ahead SL stem 40° / 31.8 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available Suitable for E-Bikes in Category B: E-Mountain Bike (Light Off-Road to E-Enduro) PROCRAFT E-MTB components are intended for off-road use. In addition to use on paths and technical sections that have roots, smaller stones, ruts and loose ground, components of this category may be used in rough terrain with rocky sections. Jumps up to 1.0m in height are permitted. PROCRAFT components in this category are not intended for extreme riding such as dirt jumping, freeriding, downhill, stunts or North Shore trails of any type – neither in training nor competition. Generally, these are MTB hardtails and full-suspension e-MTBs with travel up to approximately 170 mm. The maximum permissible payload (rider plus gear) for PROCRAFT components in this category is 120kg. However, the maximum permissible payload of the bicycle to which these PROCRAFT components are fitted must be observed. More information on intended use of the Procraft e-bike components.
Ahead SL stem 6° / 25.4 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available
Ahead SL stem 6° / 26 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available
Ahead SL stem 6° / 31.8 mm
€27.90
Subscription
Ultra-light and beautifully shaped stem. 3D forged and CNC machined 6061/T6 aluminium Four-bolt bar clamp (chrome-moly hardware) 1 1/8" steerer tube clamp Different lengths, angles and bar sizes available Suitable for E-Bikes in Category B: E-Mountain Bike (Light Off-Road to E-Enduro) PROCRAFT E-MTB components are intended for off-road use. In addition to use on paths and technical sections that have roots, smaller stones, ruts and loose ground, components of this category may be used in rough terrain with rocky sections. Jumps up to 1.0m in height are permitted. PROCRAFT components in this category are not intended for extreme riding such as dirt jumping, freeriding, downhill, stunts or North Shore trails of any type – neither in training nor competition. Generally, these are MTB hardtails and full-suspension e-MTBs with travel up to approximately 170 mm. The maximum permissible payload (rider plus gear) for PROCRAFT components in this category is 120kg. However, the maximum permissible payload of the bicycle to which these PROCRAFT components are fitted must be observed. More information on intended use of the Procraft e-bike components.
City Pro stem 25°/31.8 mm
€29.90
Subscription
The PROCRAFT Riser Pro is available in three different widths. With its 25° angle, the stem offers an upright and comfortable riding position. Clamp diameter: 31.8 mm Length: 70, 80, 90 mm Angle: 25° Material: aluminium Colour: black
Comp II stem 17° / 31.8 mm
€19.90
Subscription
Elegant stem available in lengths from 50 mm to 110 mm and in two angles: 7° and 17°. Clamp diameter: 31.8 mm Length: 60, 70, 80, 90, 100, 110 mm Angle: 17° Material: 6061-T6 aluminium Colour: black
Comp II stem 7° / 31.8 mm
€19.90
Subscription
Elegant stem available in lengths from 50 mm to 110 mm and in two angles: 7° and 17°. Clamp diameter: 31.8 mm Length: 50, 60, 70, 80, 90, 100, 110 mm Angle: 7° Material: 6061-T6 aluminium Colour: black
PRC ST2 stem 17°/31.8 mm
€79.90
Subscription
The PRC ST2 stem is manufactured using cutting-edge 3D forging technology and four-axis CNC machining. The foundation is premium 7050-T6 aluminium. This stem was developed using the latest technology in close collaboration with MERIDA engineers Key characteristics are its excellent stability and stiffness despite extremely low weight. To meet the highest safety requirements, the PRC ST2 has been tested using the latest methods and exceeds ISO standards by a considerable margin. The glass-bead blasted surface achieves perfect dimensional accuracy and elegant design. Its black anodised finish, combined with polished detailing, makes it a refined centrepiece any bike. Excellent stability & stiffness Lightweight Angle: +/- 17° Handlebar clamp: 31.8 mm Steerer clamp: 28.6 mm / 1 1/8" Material: 3D forged 7050-T6 aluminium Also available from us: Matching replacement bolts
PRC ST2 stem 6°/31.8 mm
€79.90
Subscription
The PRC ST2 stem is manufactured using cutting-edge 3D forging technology and four-axis CNC machining.The foundation is premium 7050-T6 aluminium. This stem was developed using the latest technology in close collaboration with MERIDA engineers. The PRC ST2 stem is manufactured using the latest 3D forging technology and four-axis CNC milling technology. The basis is made of high-quality 7050-T6 aluminium. This stem was developed using the latest technology in close collaboration with MERIDA engineers Key characteristics are its excellent stability and stiffness despite extremely low weight. To meet the highest safety requirements, the PRC ST2 has been tested using the latest methods and exceeds ISO standards by a considerable margin. The glass-bead blasted surface achieves perfect dimensional accuracy and elegant design. Its black anodised finish, combined with polished detailing, makes it a refined centrepieceon any bike. Angle: +/- 6° Excellent stability & stiffness Lightweight Handlebar clamp: 31.8 mm Steerer clamp: 28.6 mm / 1 1/8" Material: 3D forged 7050-T6 aluminium Also available from us: Matching replacement bolts
Pro+ II stem 7°/31.8 mm
€32.90
Subscription
Beautifully designed stem available in four different lengths from 50 to 80 mm and with an angle of 7°. This stem can be used with a GoPro adapter. Clamp diameter: 31.8 mm Length: 50, 60, 70, 80 mm Angle: 7° Material: 6061-T6 aluminium Colour: black
Replacement stem bolts for PRC ST2 and MERIDA TEAM SL
€5.90
Subscription
Material: chromoly Suitable for the following stems: MERIDA TEAM Superlight (19209101 – 19209106) Procraft ST2 6° (11333260 – 11333268) Procraft ST2 17° (11333280 – 11333285)
Road Race stem -7°/31.8 mm
€37.90
Subscription
Beautifully designed road bike stem available in four different lengths from 60 mm to 90 mm and with an angle of -8°. Clamp diameter: 31.8 mm Length: 60, 70, 80, 90 mm Angle: -7° Material: 2014-T6 aluminium Colour: black