Procraft AE Ultimate Road Bike Handlebar – Aerodynamics & Performance at the Highest Level Maximum efficiency and speed – the Procraft AE Ultimate Carbon Handlebar was developed for demanding road cyclists who value aerodynamics, comfort, and control. Thanks to its aerodynamically shaped upper handlebar section, it minimizes air resistance and enables an optimal grip position for long, energy-saving rides. With two available widths of 400 mm and 420 mm, the AE Ultimate adapts perfectly to your individual needs. The 4° flare ensures an ergonomic grip position on the lower handlebar, while the 125 mm drop and 78 mm reach offer a balanced mix of comfort and a sporty riding position. For a clean look and optimized aerodynamics, the handlebar features internal cable routing for brake and shift cables. In addition, special openings for internal routing of electronic cables are integrated, allowing modern electronic shifting systems to be used seamlessly. Product details: Material: Carbon Weight: 236 g (400 mm) / 246 g (420 mm) Width: 400 mm / 420 mm Clamp size: 31.8 mm Drop: 125 mm Reach: 78 mm Flare: 4° Optimized aerodynamics thanks to flattened upper handlebar Internal cable routing for brake and shift cables Openings for internal electronic cable routing Whether you're racing at high speeds or going on long training rides, with the Procraft AE Ultimate you'll benefit from maximum aerodynamics, a tidy cockpit look, and perfect control. Your choice for speed, efficiency, and innovation!

Budget-friendly handlebar with perfect ergonomics for urban riding and comfort.

Suitable for E-Bikes in Category B: E-Mountain Bike (Light Off-Road to E-Enduro) PROCRAFT E-MTB components are intended for off-road use. In addition to use on paths and technical sections that have roots, smaller stones, ruts and loose ground, components of this category may be used in rough terrain with rocky sections. Jumps up to 1.0m in height are permitted. PROCRAFT components in this category are not intended for extreme riding such as dirt jumping, freeriding, downhill, stunts or North Shore trails of any type – neither in training nor competition. Generally, these are MTB hardtails and full-suspension e-MTBs with travel up to approximately 170 mm. The maximum permissible payload (rider plus gear) for PROCRAFT components in this category is 120kg. However, the maximum permissible payload of the bicycle to which these PROCRAFT components are fitted must be observed. More information on intended use of the Procraft e-bike components.

The PROCRAFT City Pro provides a comfortable and natural riding position through its design, relieving strain on the neck and shoulders. The handlebar is also designed for internal cable routing. Material: Aluminium Width: 660 mm Clamp diameter: 31.8 mm Weight: 295 g

Procraft EDR Ultimate Handlebar – Lightweight, Stable & Perfect for Action Maximum control on demanding trails – with the Procraft EDR Ultimate Carbon Handlebar, you are equipped for any challenge off-road. Developed for enduro, downhill, trail, and e-MTB, this handlebar combines low weight with high stability. With a width of 800 mm, it ensures precise handling and full control in technical sections. Thanks to the 35 mm clamp size, it offers optimal stiffness, while the 9° backsweep ensures an ergonomic hand position. In addition, the handlebar has been tested under extreme conditions and meets the highest safety requirements, so you can concentrate fully on your performance. Technical data: Material: Carbon Weight: 210 g (20 mm rise) / 220 g (35 mm rise) Width: 800 mm Clamp size: 35 mm Rise: 20 mm / 35 mm Backsweep: 9° Can be shortened: Yes/to 750 mm Whether steep descents or challenging climbs – the Procraft Carbon Handlebar gets you to your destination safely and confidently. Your choice for performance & control!

Flat MTB handlebar delivering exceptional value for money. Manufactured to the highest safety standards for mountain biking, therefore suitable for off-road applications in accordance with the latest guidelines! Made from 6061/T6 aluminium with tapered geometry. Available in standard 25.4 mm or 31.8 mm oversized diameters.

Flat handlebar with a backsweep of 8° for excellent grip and riding comfort. Material: 2014-T6 aluminium Width: 660 mm Clamp diameter: 31.8 mm Backsweep: 8° Weight: 261 g

Latest generation PRC MTB carbon handlebar with modern geometry and fresh design, perfectly matched to the new PRC ST2 stem. The flat variant of this MTB handlebar provides the ideal balance between sporty riding position and control with its 9° back sweep. - Diameter: 31.8 mm- Back sweep: 9°- Widths: 720 mm / 760 mm- Tested according to current state of the art / ISO 4210 – MTB standard

Latest generation PRC MTB carbon handlebar with modern geometry and fresh design, perfectly matched to the new PRC ST2 stem. Everything under control at all times on the trail – that's the philosophy of the PRC HB4.1. With its width of up to 760 mm and 15 mm rise, it offers exactly what riders demand in rough terrain. - Diameter: 31.8 mm- Back sweep: 9°- Up sweep: 6° (15 mm)- Widths: 720 mm / 760 mm- Tested according to latest technical standards / ISO 4210 – MTB standard

Riser handlebar offering exceptional value for money, manufactured to the highest safety standards for MTB use and therefore suitable for off-road riding according to the latest guidelines! Made from 2014/T6 aluminium – lightweight yet extremely durable.

MTB and trekking handlebar with ergonomic 12° backsweep, produced to the highest MTB safety standards, making it approved for off-road use under current regulations!

The PROCRAFT Riser Pro is available in three different widths. A rise of 22 mm and a backsweep of 9° ensure a perfect combination of comfort and control. Material: 6061-T6 aluminium Width: 640, 680, 720 mm Clamp diameter: 31.8 mm Rise: 22 mm Backsweep: 9°

Ergonomic road bike handlebar with many great features. Can still be gripped very comfortably despite the narrower top section dimensions, as the bend is tapered. This ensures the hands have sufficient space. - Reduced reach, less drop - Front cable routing groove - Marked area on the forward curve for easy brake lever fitting - Available with Ø 26.0 and Ø 31.8 mm clamping diameters - Reach: 70 mm - Drop: 125 mm

Sport handlebar offering outstanding value for money.

The PROCRAFT Top Flat Carbon handlebar is a real eye-catcher. The refined styling and cohesive PROCRAFT design make it a perfect match with the PROCRAFT ST2 stem. The material ensures a very low weight without compromising stability. The stiff carbon handlebar provides a sporty riding position with excellent control thanks to its 9° backsweep. Tested to current technical standards / ISO 4210 – MTB. Material: carbon Width: 760 mm Clamp diameter: 31.8 mm Backsweep: 9° Weight: 130 g